My rough-in valve in the shower was installed too far back from my finished wall. Can I get an extension kit to correct this?
2 people found this answer helpful
Yes. The extension kit number will be dependent on the type of valve that is installed, as well as the finish of the trim. Below is a list out service kit numbers and descriptions for some of these extensions kits that are available.
The extension kits for Posi-Temp valve:
Service kit | Description |
---|---|
96945 | 1" Chrome extension |
96945BN | 1" Brushed Nickel extension |
969858 | 1" Polished Brass extension |
96945PM | 1" Platinum or Satine extension |
96945WR | 1" Wrought Iron or Oil Rubbed Bronze extension |
96955 | 2" Chrome extension |
96868 | 2" Polished Brass extension |
For the Moentrol valve:
Service kit | Description |
---|---|
137347 | 1" Chrome extension |
137347BN | 1" Brushed Nickel extension |
137347P | 1" Polished Brass extension |
137347NL | 1" Nickel extension |
137347WR | 1" Wrought Iron or Oil Rubbed Bronze extension |
137347BB | 1" Brushed Bronze extension |
For the Moentrol 2- or 3- function valve (installed after July 2007):
Service kit | Description |
---|---|
137167 | 1" Chrome extension |
137167BN | 1" Brushed Nickel extension |
137167WR | 1" Wrought Iron or Oil Rubbed Bronze extension |
For the 2- or 3-function transfer valves (models 3375 or 3372):
Service kit | Description |
---|---|
148479 | 1" Chrome extension |
148479BN | 1" Brushed Nickel extension |
148479WR | 1" Wrought Iron or Oil Rubbed Bronze extension |
For the 3/4" Exact Temp valve (installed after September 2009):
Service kit | Description |
---|---|
147206 | 3/4" extension fir the S3371 valve |
147212 | 1" extension for the S3600 volume control valve |
Was this helpful?